Equip The City Bus With

Electric Drive

 

With the development of urban transportation and the rapid increase of vehicles,

traditional internal combustion engine vehicles have brought three adverse effects

to the social economy and urban residents' lives, aggravating the energy crisis and air

pollution, while the latter threatens the lives and health of urban residents. Low

carbon, green and zero emissions travel are inevitable requirements for

future travel.

 

The pure electric bus produced by Shanghai Tianqing Tiantuo Information Technology Co. , Ltd.

can achieve zero emission and no pollution purpose. They have

reliable product process and quality, and outstanding advantages of

being green, energy saving and environmental protection, strong power, safe and stable,

long life, etc.

Structure safety

 

 

It ensures the strength, rigidity and collision safety performance of the

finished vehicle; saves energy consumption and improves heat dissipation

performance; the skeleton of the finished vehicle will not fail for more

than 8 years; through the application of high-strength steel, the

structural strength of the finished vehicle is doubled compared with

the traditional steel.

 

CAE analysis

technology

 

full loading

technology

 

application of high

strength steel

High voltage protection
Vehicle Insulation
Five protection
High integration
30 cm

under normal conditions for 30min

IP68

Protection level reaches IP68

Waterproof

 

The vehicle does not ignite or explode in the case of wading (the product protection level is IP68, in the case of soaked for 24 hours at a water depth of 50cm at the power turn-off state; or operates for 30min in a water depth of 30cm under normal conditions), and operates normally when water accumulates on the road;

 

The key components such as motor and electric control are designed for water cooling; the protection level reaches IP68;

 

The vehicle is driven at a speed of 5-10km/h in a pool with a water depth of 30cm. This the vehicle wading experiment. Within 10min after the test is completed, the measurement should be carried out according to the insulation resistance measurement method in GB/T18348.3-2015. The total insulation resistance value should be greater than 1MΩ.

Battery safety

The vehicle does not ignite or explode in the case of wading (the product protection level is IP68, in the case of soaked for 24 hours at a water depth of 50cm at the power turn-off state; or operates for 30min in a water depth of 30cm under normal conditions), and operates normally when water accumulates on the road;

 

The key components such as motor and electric control are designed for water cooling; the protection level reaches IP68;

 

The vehicle is driven at a speed of 5-10km/h in a pool with a water depth of 30cm. This the vehicle wading experiment. Within 10min after the test is completed, the measurement should be carried out according to the insulation resistance measurement method in GB/T18348.3-2015. The total insulation resistance value should be greater than 1MΩ.

Extreme environmental verification

The vehicle meets the requirements of operating at five extremes environments (high temperature, high humidity, extreme cold, high altitude, high slope)

Product recommendation
I'm sorry that I didn't find what you expected!